Company Add
Longgang District,Shenzhen,China
The PV500 Series Solar Pump Inverter provides the ultimate combination of power, ease of use, flexibility, and performance. Contributes drastically to cost reduction by cutting power consumption!
3-7 Working Days For Standard Series
0.75KW-630KW High Performance Universal Inverter
Single-phass 220V model: 200V-240V.
Three-phase 220V model: 200V-240V.
Three-phase 380V model: 380V-460V.
The 900 series inverter is a high-performance vector control inverter launched by M-driver, which integrates the synchronous motor drive and asynchronous motor drive. It supports three-phase AC asynchronous motors and permanent magnet synchronous motors; drive control technologies, such as the improved vector VF control technology, Vector speed control (IMSVC) of asynchronous motor and Vector speed control (FMSVC) of synchronous motor.
900 series inverters are named following rules below:
| Item | Specifications | |
| Basic Functions | Motor Control Mode | V/F control |
| Vector speed control (IMSVC) of asynchronous motor | ||
| Vector speed control (FMSVC) of synchronous motor | ||
| Maximum Frequency | Vector Control：0~500Hz V/F Control：0~500Hz | |
| Carrier Frequency | 0.5kHz~16kHz; the carrier frequency will be automatically adjusted according to the load characteristics. | |
| Input Frequency Resolution | Digital Setting： 0.1Hz | |
| Analog Setting： 0.01V corresponding maximum frequency ×0.1% | ||
| Control Mode | Open Loop Vector Control(SVC), V/F Control | |
| Startup Torque | 0.5Hz/150%(SVC) | |
| Basic Functions | Speed Range and Precision | 1：100(SVC)；±0.5%(SVC) |
| Overload Capability | 150% rated current 60s,180% rated current 3s | |
| Torque Boost | 0.1%~30.0% | |
| V/F Curve | Line Type、Square Type | |
| Acc. / dec Curve | Straight line or S curve acceleration and deceleration mode | |
| Acceleration and deceleration time range between 0.0 to 500.0s. | ||
| DC Brake | DC Brake Frequency：0.00Hz to maximum frequency. Brake time： 0.0s to 36.0s | |
| Multi-speed Running | It can realize at maximum of 4 segments speed running via the control terminal. | |
| Built-in PID | It is easy to realize process-controlled closed loop control system. | |
| Over-voltage/current Stall Control | It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process. | |
| Motor Over-temperature Protection | Acceptable motor temperature sensor input (PT100, PT1000) | |
| Timing Control | Timing control function：set time range 0.0~6500.0Min | |
| Bus Support | Support Site Bus：Modbus | |
| Protection Function | It can implement power-on motor short-circuit detection, output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection, which can be turned on or shielded as required. | |
| Running | Running Command Source | Operation panel reference, control terminal reference, and communication reference |
| Target Frequency Source | Digital reference, analog signal reference, multi-segment speed reference, PI control reference, and communication reference | |
| Control Signal Input Terminal | 5 digital input； | |
| 2 analog input，support 0~10V、4~20mA、0~20mA、20~0mA、20~4mA and 10~0V signal | ||
| Control Signal Output Terminal | 1 relay output, 2 analog input. | |
| 2 analog output，support 0~10V、4~20mA、0~20mA、20~0mA、20~4mA and 10~0V 0~20mA signal | ||
| Environment | Using Place | Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt. |
| Altitude | 0~4000m；Derating use when more than 1000m (decrease by 1% per 100 meters) | |
| Ambient Temperature | -10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃) | |
| Humidity | Less than 95%RH, without condensing | |
| Vibration | Less than 5.9m/s (0.6g) | |
| Storge Temperature | －20℃~＋60℃ | |
| IP Level | IP20 | |
| Pollution Level | PD2 | |
| Power Distribution System | TN, TT | |
General type three-phase 380V terminal wiring diagram:
